Orifice Assembly Banner

Orifice Assembly Manufacturer in India

What Is an Orifice Assembly?

              An orifice assembly is a precision-engineered flow measurement and flow restriction device installed in a pipeline to measure the flow of liquids, gases, and steam. A typical orifice plate assembly consists of an accurately machined orifice plate, flanges, gaskets, fasteners, and pressure tapping connections, assembled according to the requirements of the process application.

            The orifice plate creates a controlled restriction in the pipeline,

Orifice Plate Assembly

Producing a measurable pressure difference between the upstream and downstream sides. This differential pressure is measured through pressure tapping points and can be used to calculate the flow rate of the process fluid. The accuracy of the orifice opening, plate geometry, installation, and pressure connections plays an important role in achieving reliable flow measurement.

            As an experienced orifice assembly manufacturer in India, Filtomech provides industrial orifice assemblies designed for demanding process applications. Our industrial orifice assembly solutions can be engineered according to pipeline size, operating pressure, temperature, process fluid, material requirements, and project specifications.

           Orifice assemblies are widely used across oil & gas, chemical, petrochemical, power, pharmaceutical, water treatment, and other process industries where dependable flow measurement and controlled pressure conditions are essential. Proper material selection, dimensional accuracy, and installation help ensure consistent performance and long service life.

Orifice Assembly Components

Orifice Assembly Components

Built Around Your Pipeline Requirements

Filtomech manufactures orifice assemblies to suit specific pipeline configurations, operating conditions and process requirements.

Custom Dimensions

Designed for specified pipe sizes, bore dimensions and flange ratings.

Material Selection

Available in SS304, SS316, carbon steel and other suitable materials.

Assembly Configuration

Flanges, gaskets, fasteners and pressure tapping arrangements.

Process Compatibility

Selected according to operating pressure, temperature and process fluid.

Materials of Construction

Carbon Steel
Stainless Steel 316 / 316L
Other Materials

Technical Specification

Parameter Available Options
Nominal Pipe Size As per requirement
Pressure Rating As per requirement
Orifice Type As per application
Material CS / SS / Alloy options
End Connection Flanged / as required
Pressure Tapping As required
Plate Thickness As per design
Gasket Application-specific
Surface Finish As required
Design Standard As applicable
Testing As per project requirement

How Orifice Assembly Works

How Orifice Assembly Works
Orifice Assembely Working

Applications

Oil and Gas
Chemical Processing
Petrochemical Refineries
Power Plants
Pharmaceutical Plants
Food and Breverage
Prodess Indutries
Compressed Gas System

Industries We Serve

Oil and Gas
Chemical Industry
Petrochemical Industry
Water Treatment Industry
Steel Industry

Share Your Requirements

Frequently Asked Questions

What is an orifice assembly?

An orifice assembly is a pipeline-mounted arrangement used for flow measurement or controlled flow restriction. It generally includes an orifice plate along with flanges, gaskets, fasteners, and pressure tapping connections. The orifice creates a controlled pressure difference that can be used to determine the flow rate.

What is an orifice plate assembly used for?

An orifice plate assembly is primarily used to measure the flow of liquids, gases, and steam in process pipelines. The orifice plate creates a differential pressure between the upstream and downstream sides, allowing the flow rate to be calculated using suitable measurement instrumentation.

What is the difference between an orifice plate and an orifice assembly?

An orifice plate is the precision-machined plate containing the flow opening. An orifice assembly is the complete arrangement incorporating the orifice plate with associated components such as flanges, gaskets, fasteners, and pressure connections.

What materials are available for orifice assemblies?

Orifice assemblies can be manufactured using materials selected according to the process fluid, operating temperature, pressure, and corrosion requirements. Common options include carbon steel, stainless steel, and alloy materials. Special materials can also be considered for demanding applications.

Can Filtomech manufacture custom orifice assemblies?

Yes. Filtomech can manufacture custom orifice assemblies according to project and application requirements. Important parameters may include pipeline size, operating pressure, operating temperature, process fluid, material, pressure class, connection type, and required quantity.

Where are industrial orifice assemblies used?

Industrial orifice assemblies are commonly used in oil & gas, petrochemical, chemical processing, power generation, pharmaceutical, food & beverage, water treatment, and other process industries where dependable flow measurement or controlled flow restriction is required.

What information is required to select an orifice assembly?

For proper selection and engineering, customers should provide available information such as pipe size, fluid type, flow rate, operating pressure, operating temperature, material requirements, pressure class, connection type, and quantity. Additional project specifications or drawings may also be required.

Can an orifice assembly be supplied for high-pressure applications?

Yes, an orifice assembly can be engineered for high-pressure service when the appropriate materials, dimensions, pressure rating, sealing arrangement, and design requirements are specified. The final configuration should be selected according to the actual operating conditions and applicable project requirements.

How does an orifice assembly measure flow?

The orifice plate creates a restriction in the pipeline. As fluid passes through the opening, its velocity and pressure change, producing a measurable differential pressure. This differential pressure can then be used with appropriate flow-measurement calculations and instrumentation to determine the flow rate.

How can I request a quotation for an orifice assembly from Filtomech?

You can send Filtomech your pipe size, process fluid, flow rate, operating pressure and temperature, material requirement, pressure class, connection type, and quantity. Based on the available information, the required orifice assembly can be evaluated according to your application and project requirements.

Looking for a Reliable Orifice Assembly Manufacturer in India?

Share your process and piping requirements with Filtomech. Our team can help you select and manufacture an orifice assembly tailored to your application.